カビを防ぐ！
The excess moisture that is absorbed by diatomite will be released moderately when the space is dry. Then, you may have such question; "If the room always has much humidity, the absorbed moisture is stored inside and will it cause mold finally?"
The mold virus is floating in the air and it grows especially under the condition that room temperature is from 25 to 30℃, humidity is over 80%, be dirty and poorly ventilated. Invisible virus increase immediately in such situation and it will grow as visible one. Multiplication of mold spore in the air is bad for your health.
Actually, we have heard mold growing by that diatomite has taken in the excessive moisture. But, diatomite is a pile of alga fossil and must be anti-mold material originally.
Why does mold grow on the wall of diatomite coating?
That's why synthetic resin in solidification material will be the hotbed of mold.
The solidification material of EM Diatomite is slaked lime which is calcined among halite over many hours. Unlike one that is burned with high temperature, it has moderate sized particles and doesn't cover pores for moisture absorbing/releasing. Also, its alkali is anti-mold.
Moreover, we combined calcined scallop which is strong alkali and has bactericidal action, and realized high performance for preventing mold.
You will be reluctant to mix mold inhibitor into precious diatomite.
EM Diatomite shows maximum natural power and it is safe・harmless・anti-mold plastering.
※Please treat your house with care, forever. First, ventilate your room frequently!
The mold virus is floating in the air and it grows especially under the condition that room temperature is from 25 to 30℃, humidity is over 80%, be dirty and poorly ventilated. Invisible virus increase immediately in such situation and it will grow as visible one. Multiplication of mold spore in the air is bad for your health.
Actually, we have heard mold growing by that diatomite has taken in the excessive moisture. But, diatomite is a pile of alga fossil and must be anti-mold material originally.
Why does mold grow on the wall of diatomite coating?
That's why synthetic resin in solidification material will be the hotbed of mold.
The solidification material of EM Diatomite is slaked lime which is calcined among halite over many hours. Unlike one that is burned with high temperature, it has moderate sized particles and doesn't cover pores for moisture absorbing/releasing. Also, its alkali is anti-mold.
Moreover, we combined calcined scallop which is strong alkali and has bactericidal action, and realized high performance for preventing mold.
You will be reluctant to mix mold inhibitor into precious diatomite.
EM Diatomite shows maximum natural power and it is safe・harmless・anti-mold plastering.
※Please treat your house with care, forever. First, ventilate your room frequently!